Solar Battery Charging
Solar Battery Charging
Make a solar charger for NiCd and NiMH rechargeable AA, AAA etc batteries
solar | educationOne of the simplest DIY
solar projects is to make your own
solar battery charger using a small
Photovoltaic (PV) solar panel.
Only a few readily available components are necessary for this project:
Rechargeable batteries - AA or AAA sized. £1-2 each.
Plastic battery holder with leads. £0.20-£0.50.
One diode. £0.05-£0.10.
Solar panel. £depends on size.
NEW - REUK.co.uk are now selling suitable solar panels in the REUK shop. The panels on offer are 3 Volt 100 milliamp PV Solar Panels (for charging 1 or 2 batteries), and 6 Volt 250 milliamp (for charging 4 batteries).
If you are interested in putting together a solar battery charger feel free to email neil@reuk.co.uk with details of your exact requirements and we'll see if we can put together a suitable package for you including all of the necessary parts.
Building a Solar Battery Charger
Pictured above is a
battery holder for one AA battery. These battery holders are available in a range of sizes from 1 AAA to 4 AA batteries. Use the one which is suitable for your needs. The size of the
solar panel required depends on the number of batteries you intend to charge and on their capacities. Note that all batteries charged at the same time should have the same capacity.
Each
rechargeable AA or AAA battery is rated at 1.2 volts and needs a charging voltage of around 1.3-1.4 volts to reach full capacity. Therefore if you want to charge 4 x AA batteries you would need a 6 or 9 volt solar panel.
Select a Suitable Solar Panel
Ideally you should not charge a battery with more than 10% of its capacity as current - for example, charge a 2,000mah capacity battery with a current of 200ma or lower. This is particularly important when the batteries are nearing full charge and far less important when they are fully discharged. If you break the
10% rule then overcharging can occur damaging the battery potentially beyond repair and generating heat.
A
diode is used to prevent the batteries' charge being dissipated back through the
solar panel when it is dark. A
1N5817 diode is perfect for the job as it only 0.2 volts is lost as the generated electricity passes through it. If you have a
Germanium Diode these are also excellent.
Putting Your Solar Battery Charger Together
Detailed instructions on putting together a
simple solar charger like this are now available in our article
Basic 4 AA Solar Battery Charger Plans. These plans can be used for all
solar battery chargers whether you are making a 1 AAA battery charger or a 4 AA battery charger.
Solar Battery Charger Enhancements
This very basic solar charger can be improved by adding a current limiting circuit. Click here to find out how to
Make a Solar Battery Charger with an LM317T. The
LM317T is a cheap electronic component (cost under £1) which can be used to regulate current. Therefore you can safely charge batteries with a larger
solar panel without the batteries overcharging or overheating.
Article Last Modified: 09:43, 30th Jul 2007Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
Solar Battery Charger With LM317TFind out how to make a current controlled solar battery charger using an LM317T
Article Last Modified: 09:34, 30th Mar 2007solar | education | electric circuitBasic 4 AA Solar Battery Charger PlansMake a simple solar charger for 4 AA rechargeable batteries
Article Last Modified: 09:43, 30th Jul 2007solar | educationMake a Simple Battery Status MonitorMonitor battery status with this easy electric circuit project - no skill required!
Article Last Modified: 12:33, 16th Mar 2007storage | electric circuitUsing The LM317T With LED LightingUse an LM317T to regulate the current in LED lighting projects
Article Last Modified: 12:47, 12th Mar 2008lighting | electric circuitSolar Charge ControllerFind out more about Solar Charge Controllers
Article Last Modified: 11:12, 29th Oct 2009solar | electronics | electric circuitLM317T Voltage Regulator ChipLearn about the LM317T and its uses in renewable energy projects
Article Last Modified: 14:35, 9th Sep 2008electronics | electric circuitHigh Capacity Alternative to 9 Volt BatteryGet ten times the capacity of a 9 Volt battery to power your devices
Article Last Modified: 15:58, 10th Sep 2008general | electric circuit | solarHow Do PV Solar Panels WorkFind out how photovoltaic solar cells generate electricity
Article Last Modified: 10:14, 10th Jan 2009solar | educationZener Diode Voltage RegulatorMake a simple zener diode voltage regulator
Article Last Modified: 17:31, 7th Mar 2008electric circuit | educationDC Voltage Multiplier Circuit PlansBuild a circuit to boost the voltage of a DC power source using a MAX756
IC Chip
Article Last Modified: 09:06, 10th Jul 2008electric circuit | electronics | education
|
|
|
