| RSS Web Feed for Renewable Energy UK |  | REUK Shop | Directory | Bookmark Site | About Us  

Pumps for Irrigation and Rainwater Harvesting



Pumps For Irrigation And Rainwater Harvesting

Find out how to choose a submersible pump for irrigation and rainwater collection systems

water | shopping | general
Printer Friendly Version Print Article     

Submersible Pumps

A pump is the key component in most irrigation, rainwater toilet flush, and greywater systems. The commonest requirement is to shift volumes of water from a large collection/storage tank to a header tank from which it is used to water crops or gravity feed toilet cisterns.

Mains Power or Low Voltage Pumps

The first choice to make is whether to purchase a mains powered pump, or a low voltage (typically 12V) one.

Cable Size
Twin and Earth 5A Cable

A 300W mains powered pump draws a current of below 2 Amps and so quite thin cable can be used - e.g. the cheap 5A-rated twin and earth cable used in domestic lighting circuits would be perfect. A 300W 12V pump on the other hand would draw a current of over 25 Amps and so thick cable would be required - very expensive with the price of copper where it is, particularly over long runs. (Visit our Line Losses Calculator for a rough idea of the diameter of cable required for low voltage pumps).

Pump Cost and Quality
In general a mains powered pump will cost less than an equivalent low voltage pump for all but the smallest of pumps. There are more mains powered pumps manufactured and sold than low voltage pumps which explains the difference in price, but low voltage pumps tend to be better made from higher quality materials than mains powered pumps as they are typically designed to be used in harsher conditions - e.g. outdoors and marine environments.

Float Switches
Mains powered pump with integrated float switch

It is very useful to purchase a pump with a built in float switch. This will automatically cut the power to the pump when there is no water left to pump thereby protecting the pump from being badly damaged and/or burnt out by running dry. Mains powered pumps are more likely than low voltage pumps to come with an integrated float switch - probably because a float switch on a low voltage pump has to switch a high current necessitating either an expensive float switch or added electronics (which can go wrong!). Submersible pumps are much more likely to have integrated float switches than other pumps.

If using a pump without an integrated float switch, a suitable float switch (REUK Shop) should be fitted to the water tank above the pump inlet to protect the pump. This will add to the cost and complexity of any pump controller. (See our articles Automatic Pump Shut Off Circuit, and Simple Sump Pump Controller.)

Hidden Costs
If a pump is to be switched by a relay then a qualified electrician must make any high voltage connections. Therefore the cost of an electrician must be deducted from the initial savings of purchasing a mains powered pump. Future maintenance must be also be considered as an electrician could be required again.

Head and Flow Rate

The ability of a pump to pump is given by its head and flow rate. The head is the maximum height to which a pump can pump water.
In the UK most pumps are sold with the head specified in metres or feet, or alternatively the water pressure generated by the pump measured in psi (pounds per square inch).

To convert from head to psi:
pressure (psi) = 0.434 * head (feet)
pressure (psi) = 0.132 * head (metres)
To convert from psi to head:
head (feet) = 2.31 * pressure (psi)
head (metres) = 0.705 * pressure (psi)

When selecting a pump, you need to measure the height difference between the pump's water inlet, and the highest point the water is to be pumped. The head of the pump chosen must be greater than that measured distance, ideally by at least 25% so the pump is not over-worked.

The flow rate is a measure (typically in litres or gallons per minute) of the amount of water which can be pushed out of the pump. This flow rate falls when water must be pumped upwards - i.e. a pump with a head of 5 metres and a flow rate of 10 litres per minute, will have a flow rate of 0 litres per minute if the water is to be pumped 5 metres or higher.

For non-submersible pumps, a further measure is lift. This tells you the maximum difference in height between the pump, and the end of the pipe connected to the pump inlet.

Buying a Pump

A huge range of pumps are listed for sale on eBay UK. Click here to search for Submersible Pumps in the UK (with the 100's of matching results for aquarium and fish pond pumps removed), or here for the same search on eBay USA.

More Information

In order to protect your pump from multi-switching - i.e. turning on and off rapidly - have a look at our article Water Pump Hysteresis Circuit
Article Last Modified: 15:16, 19th Aug 2008

Comment on this Article

If you have any comments on this article, please email them to neil@reuk.co.uk.


Recommended Related Articles

People who read this article also enjoyed the following articles:

Rainwater Toilet Flush System
Find out how to put together a complete rainwater fed toilet flushing system
Article Last Modified: 15:16, 19th Aug 2008
water | general | electronics

Solar Powered Irrigation
Water your garden or allotment with a solar powered irrigation system
Article Last Modified: 15:58, 12th Jun 2008
solar | water

Water Pump Hysteresis Circuit
A simple circuit to prevent a pump being damaged by being turned on and off rapidly (multiswitching)
Article Last Modified: 14:54, 19th Nov 2007
water | electronics | electric circuit

Automatic Pump Shut Off Circuit
Put together an automatic system to switch off a pump when there is no more fluid left to pump
Article Last Modified: 14:54, 19th Nov 2007
water | electric circuit

Simple Sump Pump Controller
Put together a sump pump controller with two float switches and NO electronics
Article Last Modified: 08:58, 5th Aug 2008
water | electric circuit | electronics

Collect Rainwater
Don't waste the rain water that falls on your home. Use it.
Article Last Modified: 16:09, 1st Jun 2007
water

Float Switch Water Level Measurement
Find out how to use float switches in renewable energy applications
Article Last Modified: 12:07, 28th Jul 2008
water | electric circuit

Rainwater Diverter
Use a rainwater diverter to send water collected in gutters to a water butt
Article Last Modified: 10:25, 30th May 2007
water | shopping

PVC Wind Turbine Blades
Learn how to make your own PVC wind turbine blades
Article Last Modified: 15:16, 19th Aug 2008
wind

Flush Toilet with Rain Water
Flush your toilet with collected rain water
Article Last Modified: 15:09, 21st Feb 2008
water | education | general

© 2006-2009 REUK - All Rights Reserved
Page Last Updated on 6th November 2009 at 01:36:09pm

Latest
Articles


Drying Clothes Indoors
Tips on drying clothes indoors without a tumble drier
energy efficiency
15:57, 29th Oct 2009

Google Powermeter
Google Powermeter - an online tool to track your home or office electricity consumption in real time online
energy efficiency
13:23, 29th Oct 2009

UK Renewable Energy Degree Courses
Study renewable energy at university in the UK
education
11:18, 29th Oct 2009

Solar Charge Controller
Find out more about Solar Charge Controllers
solar
11:12, 29th Oct 2009

Storing Wind Power with Compressed Air
Find out how wind power can be stored and sold at times of peak demand
wind
07:51, 9th Oct 2009

Simple Solar Water Preheating System
Use solar power to pre-heat water and reduce electricity/gas consumption
solar
14:47, 7th Oct 2009

Battery Desulfation
Find out how to desulfate/desulphate and rejuvenate lead acid batteries
storage
16:56, 5th Oct 2009

Drayton SHR52120 Solar Thermal Controller
Find out more about (and buy) the Drayton SHR 521 20 solar thermal controller
solar
11:44, 3rd Oct 2009



REUK Shop

Popular Items


REUK SUPER TIMER
User programmable 12V powered 10A rated repeating relay timer. 1 second to 99 hours ON and OFF times
£19.99 each.
Complete Circuits



SOLAR PUMP CONTROLLER WITH RELAY
Solar water heating system microprocessor controlled circuit with fitted 10A relay
£25.99 each.
Complete Circuits



12 VOLT 5 WATT SOLAR PANEL
Waterproof 12 Volt 5 Watt Solar Panel with aluminium frame - 290mm x 205mm x 17mm with fitted 5m leads
£33.99 each.
Solar Power



300 WATT POWER INVERTER
Convert 12V DC battery power into 230 AC to power portable televisions, computers, video recorders etc. 300 Watt power rating - peak power 600 Watts
£29.99 each.
Renewable Energy System Parts



CONVERTED PROGRAMMABLE DIGITAL TIMER RELAY
Mains powered programmable timer converted to low voltage with relay board
£21.99 each.
Renewable Energy System Parts



12 VOLT REGULATOR
Supply a fixed 12.0 Volt DC to your devices (up to 1 Amp output)
£4.99 each.
Complete Circuits



MR16 CERAMIC BULB HOLDER
Bulb holder for 12 Volt LED spotlight bulbs
£1.39 each.
Energy Efficient Lighting