Loft Insulation
Loft Insulation
Find out more about insulating your roof space
energy efficiency | general
Loft Insulation (or
Roof Insulation) is an absolutely essential part of an
energy efficient home. Heat rises, and it passes through roof tiles very easily. If your attic or loft is not well
insulated you will be sending enormous amounts of expensively heated air through your roof leaving you cold and the birds with warm feet. Effective roof insulation is worth at least
15-20% off your heating bill, and so the costs can be paid off in just a year or two - one of the fastest payback periods for
low carbon home improvements.
Insulating a Loft
Insulating a loft is a relatively simple DIY task, but you may of course prefer to employ the services of a professional as it can be a dusty, unpleasant, and cramped job.
100% grants are available in some UK regions, and much of the insulating material sold in DIY shops around the UK is subsidised by energy companies such as
E.ON - for example, with buy one get one free offers.
The commonest type of roof insulation is
blanket insulation (aka
quilt insulation). This is sold in varying thicknesses, typically on rolls which are 1200mm wide. It is designed to fill the gaps between the roof joists which are almost always 400mm or 600mm apart. Therefore, the roll can either be sawn in two (for 600mm gaps) or in three (for 400mm gaps). New UK homes should have
insulation 270mm deep, Since joists are typically 100mm high, the easiest way to achieve the stipulated depth of insulation is to use 100mm thick insulation between the joists, and then cross lay 170mm thick insulation across the joists.
Blanket insulation is typically made from glass fibres which are made from recycled glass bottles.
Other types of insulation are also available - namely sheet insulation and blown fibre insulation.
Sheet Insulation (e.g.
Kingspan or
Celotex) is usually much more expensive than blanket insulation, and is used to insulate the sloping underside of the roof rather than the attic floor. This form of insulation is found in most modern
loft conversions, and it can be covered with plasterboard to give a nice finish (as pictured above).
Blown Fibre Insulation is usually installed by a professional. Fibrous pieces (often made of flame retardant recycled paper or wool) are blown between the joists using a hose. It is therefore a very quick process, but is not very practical for lofts which are to be used for storage or habitation.
Further Loft Insulation Advice
If you intend to board out the attic so that it can be used for
storage, you must ensure that the insulation is not compressed since it will not be so effective. Instead either raise the floor so that
sufficient insulation can fit underneath it, or use boards backed with insulating material in addition to insulation between the joists. If you want to convert the attic into a habitable space, then all insulation should instead be fitted between the
roof joists since you want the attic space to be warmed by the heat rising from the rooms below (but still not let the heat escape through the roof).
Loft insulation materials can
irritate the skin, eyes, and throat - particularly in an old dusty attic. Therefore always where a long sleeved shirt, a
dust mask, and gloves when installing blanket insulation, and take care to ensure none gets into your eyes.
Most home insurance policies do not cover people putting their foot through the ceiling, so lay a sturdy plank of wood across a few joists and kneel on that rather than trying to balance on the joists.
See also our article on
Cavity Wall Insulation for more information about home insulation.
Article Last Modified: 17:14, 11th Apr 2009Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
DIY Solar Panel KitsMake your own solar panels from as little as US$2.95 per Watt.
Article Last Modified: 14:51, 16th Jul 2007solar | generalPermanent Magnet GeneratorBuild a wind or water power system with around a PM Generator
Article Last Modified: 11:44, 21st Jul 2008wind | hydroCompare Heat Pump to Condensing BoilerShould you choose a condensing boiler or an air source / ground source heat pump
Article Last Modified: 16:13, 29th Jan 2009geothermal | energy efficiency | heatingFree VAWT Wind Turbine PlansMake your own 250 Watt vertical axis wind turbine (VAWT)
Article Last Modified: 14:47, 17th Feb 2009wind | educationCombined Heat and PowerFind out more about domestic (micro) combined heat and power systems
Article Last Modified: 10:27, 31st Mar 2009heating | energy efficiency | biomass | generalStoring Wind Power with Compressed AirFind out how wind power can be stored and sold at times of peak demand
Article Last Modified: 07:51, 9th Oct 2009wind | storage | newsCavity Wall InsulationFind out about the benefits of cavity wall insulation
Article Last Modified: 10:27, 31st Mar 2009energy efficiency | heating | generalStar Delta Wiring for AlternatorsLearn about Star and Delta wiring for wind turbine and other alternators
Article Last Modified: 13:39, 10th Mar 2008education | wind | hydroLow E Double GlazingFind out more about the benefits of low-emissivity (low-E) glass
Article Last Modified: 10:14, 12th Jun 2008energy efficiency | carbon | generalEnamelled Magnet WireFind out more about the wire used to wind coils for generators and alternators
Article Last Modified: 14:34, 5th Apr 2007general | shopping
|
|
|
