How To Make MR16 LED Spotlights
How To Make MR16 LED Spotlights
Find out how to make your own LED spotlight bulbs
lighting | educationWith lighting accounting for 20% of most household electricity bills, saving electricity (and money) in this area is one of the quickest and cheapest ways to make a real difference. For many years now it has been economical to replace standard
incadescent lightbulbs with
CFL bulbs, however
LED bulbs are rapidly coming down in price and they offer huge energy savings.
It is currently possible to buy commercial 12 volt
LED Spotlights which can be simply
wired into place for under £10 each with a lifetime of 10 years and a power output of just a few watts. However, if you have a
lot of patience and access to
cheap white LEDs (try ebay) you can make your own
12 volt LED Spotlight bulbs for even less.
Making 12 Volt LED Spotlight Bulbs
In order to make your own
12V LED Spotlight bulbs you will need the following easy to obtain items: an old
halogen bulb with no glass cover on the front, up to 22
ultra-bright white LEDs, some 0.2mm aluminium sheet (obtained free from offset printers if you ask nicely), super glue, and some resisitors. You will also need basic soldering skills, soldering equipment, and an office hole-punch.
The first step is to empty the old halogen bulb. The cement which holds the bulb and connectors in place can easily be whittled away with a small screwdriver and the insides of the bulb knocked out gently with a hammer.
A small piece of 0.2mm aluminium sheet is used to hold the LEDs in place and to act as a light reflector. Because it is so thin it can easily be
punched with the office hole-punch - one hole for each LED. Simply cut out a disk 4cm in diameter and punch the holes.
The LEDs can then be superglued in place into the reflector disk you have made.
You now need to work out how you will connect the LEDs into parallel
strings in series with resistors to ensure that every LED receives the correct amount of current and voltage from the 12 Volt power source.
If you have 22 white LEDs like in this example then you could have 5 strings of 4 LEDs and 1 string of 2 LEDs in line with 1 ohm or 330 ohms of resistance respectively. Use an
online LED wizard
such as the
LED series/parallel array wizard, or the
LED Series Resistance Calculator, to decide the configuration of your strings and the
resitors you will need.
The legs of the LEDs are trimmed where required and soldered together into parallel strings in series with resitors. At the two points where the parallel strings are soldered together, thicker copper wire is soldered to act as the +ve and -ve contacts of the final bulb.
Now it is just the simple matter of glueing the completed LED light unit (after testing) in place in the empty halogen bulb holder, and trimming the contacts so that the bulb will fit into a standard
MR16 light fitting.
Full Guide to Making LED Spotlight Bulbs
Comprehensive details and many more photographs of the process are provided in the following excellent
OtherPower.com article:
How to make your own LED bulbs.
Article Last Modified: 10:43, 10th Feb 2007Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
Using The LM317T With LED LightingUse an LM317T to regulate the current in LED lighting projects
Article Last Modified: 12:47, 12th Mar 2008lighting | electric circuitLED SpotlightsFind out about Energy Efficient LED spotlights
Article Last Modified: 14:31, 29th Jul 2008lightingMR11 and MR16 12v Spotlight ConnectorsWiring for 12 volt LED spotlights
Article Last Modified: 11:40, 31st Mar 2007lighting240V LED Light BulbsFind out more about 240 Volt LED lightbulbs and spotlights
Article Last Modified: 16:26, 11th Apr 2009lightingLM317T Voltage Regulator ChipLearn about the LM317T and its uses in renewable energy projects
Article Last Modified: 14:35, 9th Sep 2008electronics | electric circuitUsing The LM317T To Regulate VoltageUse an LM317T to regulate voltage in renewable energy projects
Article Last Modified: 15:04, 7th Mar 2008electric circuit | electronicsShed and Garage Solar LightingLight your shed or garage with solar powered lighting
Article Last Modified: 16:47, 12th Nov 2008lighting | solarConvert Digital Mains Timer To Low VoltageConvert a cheap digital mains timer into a low voltage programmable timer relay
Article Last Modified: 10:21, 15th Nov 2008electronics | electric circuit | generalLED Dimmer CircuitFind out how to put together a simple but efficient PWM dimmer circuit for LEDs
Article Last Modified: 16:03, 21st Nov 2007lighting | electronics | electric circuitSolar Battery Charger With LM317TFind out how to make a current controlled solar battery charger using an LM317T
Article Last Modified: 09:34, 30th Mar 2007solar | education | electric circuit
|
|
|
