How I Built A Wind Turbine
How I Built A Wind Turbine
Read how a wind turbine was built for under US$150
wind | educationHere is the story of how Mike Davis, an astronomer in Arizona, designed and built his own
wind turbine generator spending less than US$150 and utlilising some scrap parts and items he already had.
His location is very remote and so there was no grid electricity available. With a bit of ingenuity and technical know-how he managed to put together a
wind turbine generator to charge a 12 Volt
leisure battery and give him power to run his laptop computer, shaver, to charge AA batteries etc.
Rather than trying to build his own alternator / generator, he chose to use a 30 Volt DC
Ametek PM motor purchased for just $26 from eBay (
eBay UK,
eBay USA). Such a motor can easily put out a couple of hundred watts when used as a generator.
Just the cost of the
magnets for a home made 200+ Watt alternator would have cost far in excess of $26, and it is also far cheaper than purchasing a ready made
permanent magnet alternator, so using such a motor is a great way to get started generating electricity from the wind.
His
turbine blades were home made from 6 inch PVC pipe. Again,
PVC wind turbine blades are the quickest and cheapest way to get started. He made them 24 inches long giving an overall
wind turbine diameter of over four feet.
He gives full details of the electronics he used to make his own DIY
controller. Read the full article by clicking the link below:
How I Home-Built an Electricity Producing Wind Turbine
"It was easy. You can do it too".
Article Last Modified: 15:16, 19th Aug 2008Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
DIY 2kW Wind TurbineRead about a home built 2kW wind turbine constructed from scrap
Article Last Modified: 08:46, 4th Oct 2007wind | recyclingPVC Wind Turbine BladesLearn how to make your own PVC wind turbine blades
Article Last Modified: 15:16, 19th Aug 2008windPermanent Magnet GeneratorBuild a wind or water power system with around a PM Generator
Article Last Modified: 11:44, 21st Jul 2008wind | hydroFree VAWT Wind Turbine PlansMake your own 250 Watt vertical axis wind turbine (VAWT)
Article Last Modified: 14:47, 17th Feb 2009wind | educationAmetek PM MotorsUse an Ametek PM Motor as a DC Generator for Wind or Hydro Power
Article Last Modified: 09:14, 22nd Jul 2008wind | hydroPhotos of PVC Wind Turbine BladesPhotographs of PVC wind turbine blades
Article Last Modified: 13:09, 22nd Dec 2006windBuild a Savonius Wind TurbineFind out how to build a simple DIY Savonius type VAWT
Article Last Modified: 12:31, 23rd Jul 2008windDynamo Hubs For Wind TurbinesDynamo Hubs and bottle dynamos for use in small DIY wind turbine generators
Article Last Modified: 12:18, 11th Apr 2009wind | electronicsSavonius Wind TurbinesWhat is a savonius wind turbine - savonius (VAWT)
Article Last Modified: 12:31, 23rd Jul 2008wind | educationStoring Wind Power with Compressed AirFind out how wind power can be stored and sold at times of peak demand
Article Last Modified: 17:17, 11th Apr 2009wind | storage | news
|
|
|
