Betz Limit
Betz Limit
Understand the Betz Limit and how it affects wind turbines
wind | educationAlbert Betz was a german physicist who in 1919 concluded that no wind turbine can convert more than 16/27 (59.3%) of the kinetic energy of the wind into mechanical energy turning a rotor. To this day this is known as the
Betz Limit or
Betz' Law. This limit has nothing to do with inefficiencies in the generator, but in the very nature of
wind turbines themselves.
Wind turbines extract energy by slowing down the wind. For a wind turbine to be 100% efficient it would need to stop 100% of the wind - but then the rotor would have to be a solid disk and it would not turn and no kinetic energy would be converted. On the other extreme, if you had a wind turbine with just one rotor blade, most of the wind passing through the area swept by the turbine blade would miss the blade completely and so the kinetic energy would be kept by the wind.
Real World Wind Turbine Power Efficiencies
The theoretical maximum
power efficiency of
any design of wind turbine is 0.59 (i.e. no more than 59% of the energy carried by the wind can be extracted by a wind turbine). Once you also factor in the engineering requirements of a wind turbine - strength and durability in particular - the real world limit is well below the
Betz Limit with values of 0.35-0.45 common even in the best designed wind turbines. By the time you take into account other ineffiencies in a complete wind turbine system - e.g. the generator, bearings, power transmission and so on - only 10-30% of the power of the wind is ever actually converted into usable electricity. (see the graphic above from the Iowa Energy Center, USA.)
Horizontal axis wind turbines (
HAWT) theoretically have higher power efficiencies than
vertical axis wind turbines (
VAWT) however wind direction is not important for a VAWT and so no time (and power) is wasted
chasing the wind. In turbulent conditions with rapid changes in wind direction more electricity will be generated by a VAWT despite its lower efficiency.
To find out more about
calculating the power of the wind and how it affects
wind turbines click here.
Article Last Modified: 15:40, 26th Jan 2007Comment on this Article
If you have any comments on this article, please email them to
neil@reuk.co.uk.
Recommended Related Articles
People who read this article also enjoyed the following articles:
Calculation of Wind PowerCalculate the power of the wind hitting your wind turbine generator
Article Last Modified: 15:06, 18th Apr 2008wind | educationCalculate kWh Generated by Wind TurbineKnowing average wind speed and rotor size of a wind turbine estimate kWh of electricity generated per year
Article Last Modified: 15:58, 8th Mar 2007wind | educationVAWT Vertical Axis Wind TurbineUnderstand the advantages and disadvantages of VAWTs
Article Last Modified: 15:35, 30th Jan 2007windSavonius Wind TurbinesWhat is a savonius wind turbine - savonius (VAWT)
Article Last Modified: 12:31, 23rd Jul 2008wind | educationWind Speed Distribution WeibullLearn about the Weibull Distribution which models wind speeds
Article Last Modified: 15:55, 8th Mar 2007wind | educationFree VAWT Wind Turbine PlansMake your own 250 Watt vertical axis wind turbine (VAWT)
Article Last Modified: 14:47, 17th Feb 2009wind | educationDarrieus Wind TurbinesWhat is a Darrieus wind turbine - Darrieus (VAWT)
Article Last Modified: 16:27, 30th Jan 2007wind | educationWorlds Largest Wind Turbine GeneratorRead about the world's biggest wind turbines - 5MW
Article Last Modified: 14:24, 6th Jan 2007windPVC Wind Turbine BladesLearn how to make your own PVC wind turbine blades
Article Last Modified: 15:16, 19th Aug 2008windWind Turbine Tip Speed RatioLearn about how the importance of the Tip Speed Ratio (TSR) in wind turbine design
Article Last Modified: 10:11, 6th Mar 2007wind | education
|
|
|
